Metric Steel Tube and Couplings
BranchesMobile
ServiceAbout
UsValue
Added Services Quality News Metric Steel Tube and Couplings |
|
| Metric Steel Tube is supplied plated or non plated and is stocked in sizes 6mm through to 50mm outside diameter. | |
EO Tubes and Tube Bends |
|
 |
Seamless EO
tubes and tube bends according to DIN 2391. Material: St 37.4 steel and 1.4571/1.4541 stainless steel. Sizes: Tubes from 4mm to 65mm o.d. Surface Finish: Outside and inside phosphated and oiled or outside zinc plated yellow, inside oiled. New CF-free: Outside with thick-film passivation (Chrome VI free), inside oiled with more than 100 hours corrosion resistance against white rust. Wall thicknesses: Tubes from 0.5mm to 10mm Tube bends from 1.5mm to 10mm Working pressure: Up to 700 bar (depending on tube o.d. and wall thickness) Inch-Dimensions available. |
EO Tube Clamps |
|
 |
Sizes: Series A from 6mm to 55mm tube o.d. Series B (twin clamps) from 6mm to 42mm tube o.d. Series C from 8mm to 219.1mm tube o.d. Material: Polypropylene on request polyamide or aluminium. Accessories: Steel; screws and top plates of series A and B are zinc plated (stainless steel on request). |
New Generation |
|
 |
New, chromium
(VI)-free fitting generation, consisting of: EO-Plus for metallic sealed connections, EO2-Plus for Dry Technology, EO2-Form for cold-formed tube connections. Gives maximum safety even at extreme pressures, 500 hours corrosion resistance against white rust. Product range: Series L 6mm – 42mm tube o.d. Series S 6mm – 38mm tube o.d. Material: steel Sealing material: (EO2-Plus/EO2-Form): NBR/FPM Nominal pressure PN: Series L up to 500 bar Series S up to 800 bar Sizes 20S – 38S: 420 bar. |
EO2- Form |
|
 |
New high-pressure
formed tube generation for steel
and stainless steel. Combines million times proven EO2-technology
and cold forming process that gives extreme rigidity and low tightening
torques. Product range: Series L 6mm - 42mm tube o.d. Series S 6mm – 38mm tube o.d. Material: Stainless steel/Steel Sealing material: FPM, NBR Nominal pressure PN: Series L: Stainless steel up to 315 bar, Steel up to 500bar* Series S: Stainless steel up to 630 bar, Steel up to 800 bar* (*only in connection with the new EO-Plus fitting generation) |
EO-2 Fittings |
|
 |
The EO-2 version of the EO standard range is a fitting system with
soft seals at all joints. The most important feature is the use of
the EO-2 functional nut instead of the progressive ring. Product range: Series LL from 4mm to 6mm tube o.d. Series L from 6mm to 42mm tube o.d. Series S from 6mm to 38mm tube o.d. Material: Steel Sealing material: NBR, FPM Nominal pressure PN: Series L up to 315 bar Series S up to 630 bar Maximum working pressure PMAX: Series L max. 500 bar Series S max. 900 bar EO-2 Compact (LL) High performance – small dimensions. For micro-hydraulics, refrigerant and lubrication systems. |
EO-2 Stainless Steel Fittings |
|
 |
The
complete soft sealed EO-2 stainless steel fittings are
mainly used in such branches of industry where safety, corrosion
resistance and ease of assembly are prime requirements. Product range: Series L from 6mm to 42mm tube o.d. Series S from 6mm to 38mm tube o.d. Material: 1.4571 stainless steel, brass. Sealing materials: NBR, FPM Nominal pressure PN: Series L up to 315 bar Series S up to 630 bar |
FM-SSA EO-2 Functional Nut from Steel for Stainless Steel Tubes |
|
 |
High
pressure resistant, easy to assemble tube connection.
Developed for stainless steel tubing, for which the corrosion resistance
of
zinc plated steel fittings is sufficient. Product range: Series L from 6mm to 42mm tube o.d. Series S from 6mm to 38mm tube o.d. Material: Steel, retaining ring stainless steel 1.4571 Sealing material: NBR, FPM Nominal pressure PN: Series L up to 315 bar Series S up to 630 bar |
EO Progressive Ring Fittings |
|
 |
These safe high pressure fittings are used in all fields of hydraulics.
A wide range of different designs allows use in a variety of applications. Product range: Series LL 4mm to 12mm tube o.d. Series L 6mm to 42mm tube o.d. Series S 6mm to 38mm tube o.d. Material: Steel Nominal pressure PN: Series LL up to 100 bar Series L up to 315 bar Series S up to 630 bar Maximum working pressure PMAX: Series L up to 500 bar Series S up to 900 bar |
EO-DUR Stainless Steel Fittings |
|
 |
The EO-DUR coated nuts on these stainless steel progressive
ring fittings are given a special pre-treatment and then silver plated.
This provides positive assembly features. These fittings are used primarily in fluid systems in areas where special demands are placed on the equipment used, such as the chemical industry, process technology and offshore industry. Product range: Series LL 4mm to 8mm tube o.d. Series L 6mm to 42mm tube o.d. Series S 6mm to 38mm tube o.d. Material: 1.4571 stainless steel Nominal pressure PN: Series LL up to 100 bar Series L up to 315 bar Series S up to 630 bar |
EO Brass Fittings |
|
 |
EO
brass fittings are available in different designs of the EO
standard range and approved for use in medium corrosion environments
such as ship building, central lubrication and plant construction. Product range: Series LL from 6mm to 12mm tube o.d. Series L from 6mm to 42mm tube o.d. Series S from 6mm to 38mm tube o.d. Material: Brass Nominal pressure PN: Series LL up to 65 bar Series L up to 200 bar Series S up to 400 bar |
EO Weld Nipple Fittings |
|
 |
A
comprehensive range of different configurations such as straight
weld nipples, elbows, reducers or directionally adjustable weld nipple
fittings with O-ring seal. Product range: Series L/S from 6mm to 42mm tube o.d. Material: Steel and 1.4571 stainless steel Nominal pressure PN: Max. 630 bar |
Parker O-Lok O-Ring Face Seal Fittings (ORFS) |
|
 |
0-Lok
Plus 'Dry Technology' soft sealed fittings provide leak-free connections
for high pressure hydraulic systems. Now with increased
pressures in the larger sizes, and with the new Flange Seal system
for cost effective hose to tube connections. Corrosion resistance
increased to 200 hours to white rust. Contamination and handling
damage eliminated with individual packaging. Captive Oring Groove
(CORG) as standard. Material: Steel and stainless steel, brass on request. Sizes: Tube o.d. 6mm to 50mm (1/4” to 2”) Port threads: BSPP, metric ISO 6149 and DIN 3852, UNF, NPTF Nominal pressure PN: Up to 630 bar Working pressure PMAX: Up to 900 bar Standards: ISO 8434-3 SAE J1453 |
Triple-Lok Plus 37° Flare fittings |
|
 |
Triple-Lok Plus
is a universal 37° flared fitting for a wide range of applications.
Now with pressures increased up to 500 bar. Contamination and handling damage eliminated with individual packaging. Corrosion resistance increased to 200 hours to white rust. For use with either inch or metric tube or hoses. Material: Steel and stainless steel, brass Sizes: Tube o.d. 6mm to 42mm (1/4” to 2”) Port threads: UNF, NPTF, BSPP, BSPT, metric Standards: ISO 6149 and DIN 3852 Nominal pressure PN: 350 bar Working pressure up to PMAX: 500 bar Standards: SAE J514, ISO 8434-2 |
Flanges |
|
 |
SAE
high pressure flanges 3000-6000 psi in accordance with ISO 6162 and SAE J518 Wide programme of flange adaptors and a choice of forged flanges. Material: Steel, stainless steel Sizes: 1/2" up to 5" in straight or 90 degree form Gear pump flanges Compact design in a wide range. steel, aluminium Sizes: LK 26 up to LK 72.5 in straight or 90 degree types SAE square flanges according to ISO 6164 (1994) and CETOP as welded versions steel, stainless steel Sizes: from 1/2" up to 5" in straight, 90 degree and 180 degree types. |
EO Non-Return Valves |
|
 |
2-way
ball valves for pneumatics and low pressure 2-way ball valves designed for pneumatic systems and other low pressure applications. Material: nickel plated brass Threads: BSPP (ISO 228-1 and DIN 259) 1/4" to 2" Working pressure: up to 30 bar dependant on series Working temperature: -20°C to +120 °C |
Contact Us
2
Witney Road
Nuffield Industrial Estate
POOLE
BH17 0GH
Tel: 01202 673333
Fax: 01202 687788
poole@hyphose.com
Unit
1Trinity Industrial Estate
Millbrook Road
SOUTHAMPTON
SO15 0LA
Tel:
023 80 512555
Fax: 023 80 512999
southampton@hyphose.com
Unit
3
The Warrior Centre
Fitzherbert Road
Farlington
PORTSMOUTH
PO6 1TX
Tel:
023 92 324644
Fax: 023 92 325549
portsmouth@hyphose.com
Trade
Counter Opening Hours
Mon - Fri 7.30am - 5.30pm
Sat 8am - 12pm
Hose
Doctor
24 hours a day 7 days aweek
Freephone 0800 373587
Back
to top
We are an ISO 9001:2000 registered company
Our goods are available by mail order - please contact
us for a quotation
Hyphose
Limited, Registered Office: 2 Witney Road, Nuffield Industrial
Estate, Poole, Dorset, BH17 0GH
Registered in England, number 1472439 - VAT number 323 5820 75
© Hyphose Ltd