Call us now on
01202 673333
for mail order items


BACK TO TOP

Metric Steel Tube is supplied plated or non plated and is stocked in sizes 6mm through to 50mm outside diameter.

EO Tubes and Tube Bends

EO Tube Clamps

New Generation

EO2-Form

EO-2 Fittings

EO2 Stainless Steel Fittings

FM-SSA EO-2 Functional Nut from Steel for Stainless Steel Tubes

EO Progressive Ring Fittings

EO-DUR Stainless Steel Fittings

EO Brass Fittings

EO Weld Nipple Fittings

Parker O-Lok O-Ring Face Seal Fittings (ORFS)

Triple-Lok Plus 37° Flare fittings

Flanges

EO Non-return Valves
EO Tubes and Tube Bends EO TUBES AND TUBE BENDS

Seamless EO tubes and tube bends according to DIN 2391.

Material: St 37.4 steel and 1.4571/1.4541 stainless steel.

Sizes: Tubes from 4mm to 65mm o.d.

Surface Finish: outside and inside phosphated and oiled or outside zinc plated yellow, inside oiled.

New CF-free: outside with thick-film passivation (Chrome VI free), inside oiled with more than 100 hours corrosion resistance against white rust.

Wall Thicknesses: tubes from 0.5mm to 10mm

Tube bends from 1.5mm to 10mm

Working pressure: Up to 700 bar (depending on tube o.d. and wall thickness)

Inch-Dimensions available.

BACK TO TOP
EO Tube Clamps EO TUBE CLAMPS

Sizes: Series A from 6mm to 55mm tube o.d.

Series B (twin clamps) from 6mm to 42mm tube o.d.

Series C from 8mm to 219.1mm tube o.d.

Material: polypropylene, on request polyamide or aluminium.

Accessories: steel; screws and top plates of series A and B are zinc plated (stainless steel on request).

BACK TO TOP
New Generation Fittings NEW GENERATION

New, chromium (VI)-free fitting generation, consisting of: EO-Plus for metallic sealed connections, EO2-Plus for Dry Technology, EO2-Form for cold-formed tube connections.

Gives maximum safety even at extreme pressures, 500 hours corrosion resistance against white rust.

Product range:

  • Series L 6mm – 42mm tube o.d.
  • Series S 6mm – 38mm tube o.d.

Material: steel

Sealing material: (EO2-Plus/EO2-Form): NBR/FPM

Nominal pressure PN:

  • Series L up to 500 bar
  • Series S up to 800 bar
  • Sizes 20S – 38S: 420 bar

BACK TO TOP 

EO-2 Form EO2-FORM

New high-pressure formed tube generation for steel and stainless steel.

Combines million times proven EO2-technology and cold forming process that gives extreme rigidity and low tightening torques.

Product range:

  • Series L 6mm - 42mm tube o.d.
  • Series S 6mm – 38mm tube o.d.

Material: Stainless steel/Steel

Sealing material: FPM, NBR

Nominal pressure PN:

  • Series L: Stainless steel up to 315 bar, Steel up to 500bar*
  • Series S: Stainless steel up to 630 bar, Steel up to 800 bar*

(*only in connection with the new EO-Plus fitting generation)

BACK TO TOP
EO-2 EO-2 FITTINGS

The EO-2 version of the EO standard range is a fitting system with soft seals at all joints.

The most important feature is the use of the EO-2 functional nut instead of the progressive ring.

Product range:

  • Series LL from 4mm to 6mm tube o.d.
  • Series L from 6mm to 42mm tube o.d.
  • Series S from 6mm to 38mm tube o.d.

Material: Steel

Sealing material: NBR, FPM

Nominal pressure PN:

  • Series L up to 315 bar
  • Series S up to 630 bar

Maximum working pressure PMAX:

  • Series L max. 500 bar
  • Series S max. 900 bar
  • EO-2 Compact (LL)

High performance – small dimensions.

For micro-hydraulics, refrigerant and lubrication systems.

BACK TO TOP
EO-2 Stainless Steel EO-2 STAINLESS STEEL FITTINGS

The complete soft sealed EO-2 stainless steel fittings are mainly used in such branches of industry where safety, corrosion resistance and ease of assembly are prime requirements.

Product range:

  • Series L from 6mm to 42mm tube o.d.
  • Series S from 6mm to 38mm tube o.d.

Material: 1.4571 stainless steel, brass.

Sealing Materials: NBR, FPM

Nominal Pressure PN:

  • Series L up to 315 bar
  • Series S up to 630 bar

BACK TO TOP
FM-SSA EO-2 FM-SSA EO-2 FUNCTIONAL NUT FROM STEEL FOR STAINLESS STEEL TUBES

High pressure resistant, easy to assemble tube connection. Developed for stainless steel tubing, for which the corrosion resistance of zinc plated steel fittings is sufficient.

Product range:

  • Series L from 6mm to 42mm tube o.d.
  • Series S from 6mm to 38mm tube o.d.

Material: steel, retaining ring stainless steel 1.4571

Sealing material: NBR, FPM

Nominal pressure PN:

  • Series L up to 315 bar
  • Series S up to 630 bar

BACK TO TOP
EO PRogressive Ring Fittings EO PROGRESSIVE RING FITTINGS

These safe high pressure fittings are used in all fields of hydraulics.

A wide range of different designs allows use in a variety of applications.

Product Range:

  • Series LL 4mm to 12mm tube o.d.
  • Series L 6mm to 42mm tube o.d.
  • Series S 6mm to 38mm tube o.d.

Material: steel

Nominal Pressure PN:

  • Series LL up to 100 bar
  • Series L up to 315 bar
  • Series S up to 630 bar

Maximum Working Pressure PMAX:

  • Series L up to 500 bar
  • Series S up to 900 bar
BACK TO TOP
EO-DUR EO-DUR STAINLESS STEEL FITTINGS

The EO-DUR coated nuts on these stainless steel progressive ring fittings are given a special pre-treatment and then silver plated.

This provides positive assembly features.

These fittings are used primarily in fluid systems in areas where special demands are placed on the equipment used, such as the chemical industry, process technology and offshore industry.

Product Range:

  • Series LL 4mm to 8mm tube o.d.
  • Series L 6mm to 42mm tube o.d.
  • Series S 6mm to 38mm tube o.d.

Material:1.4571 stainless steel

Nominal Pressure PN:

  • Series LL up to 100 bar
  • Series L up to 315 bar
  • Series S up to 630 bar

BACK TO TOP 

EO Brass Fittings EO BRASS FITTINGS

EO brass fittings are available in different designs of the EO standard range and approved for use in medium corrosion environments such as ship building, central lubrication and plant construction.

Product Range:

  • Series LL from 6mm to 12mm tube o.d.
  • Series L from 6mm to 42mm tube o.d.
  • Series S from 6mm to 38mm tube o.d.

Material: brass

Nominal Pressure PN:

  • Series LL up to 65 bar
  • Series L up to 200 bar
  • Series S up to 400 bar

BACK TO TOP 

Weld Nipple Fittings EO WELD NIPPLE FITTINGS

A comprehensive range of different configurations such as straight weld nipples, elbows, reducers or directionally adjustable weld nipple fittings with O-ring seal.

Product Range: Series L/S from 6mm to 42mm tube o.d.

Material: steel and 1.4571 stainless steel

Nominal Pressure PN: Max. 630 bar

BACK TO TOP
ORFS PARKER O-LOK O-RING FACE SEAL FITTINGS (ORFS)

0-Lok Plus 'Dry Technology' soft sealed fittings provide leak-free connections for high pressure hydraulic systems.

Now with increased pressures in the larger sizes, and with the new Flange Seal system for cost effective hose to tube connections.

Corrosion resistance increased to 200 hours to white rust.

Contamination and handling damage eliminated with individual packaging.

Captive O-ring Groove (CORG) as tandard.

Material: steel and stainless steel, brass on request.

Sizes: tube o.d. 6mm to 50mm (1/4” to 2”)

Port Threads: BSPP, metric ISO 6149 and DIN 3852, UNF, NPTF

Nominal Pressure PN: up to 630 bar

Working Pressure PMAX: up to 900 bar

Standards: ISO 8434-3 SAE J1453

BACK TO TOP
Triple-Lok TRIPLE-LOK PLUS 37° FLARE FITTINGS

Triple-Lok Plus is a universal 37° flared fitting for a wide range of applications.

Now with pressures increased up to 500 bar.

Contamination and handling damage eliminated with individual packaging.

Corrosion resistance increased to 200 hours to white rust. For use with either inch or metric tube or hoses.

Material: steel and stainless steel, brass

Sizes: tube o.d. 6mm to 42mm (1/4” to 2”)

Port Threads: UNF, NPTF, BSPP, BSPT, metric

Standards: ISO 6149 and DIN 3852

Nominal Pressure PN: 350 bar

Working Pressure up to PMAX: 500 bar

Standards: SAE J514, ISO 8434-2

BACK TO TOP
Flanges FLANGES

SAE high pressure flanges

3000-6000 psi in accordance with ISO 6162 and SAE J518

Wide programme of flange adaptors and a choice of forged flanges.

Material: steel, stainless steel

Sizes: 1/2" up to 5" in straight or 90 degree form

Gear pump flanges

Compact design in a wide range.

Material: steel, aluminium

Sizes: LK 26 up to LK 72.5 in straight or 90 degree types
SAE square flanges according to ISO 6164 (1994) and CETOP as welded versions

Material: steel, stainless steel

Sizes: from 1/2" up to 5" in straight, 90 degree and 180 degree types.

BACK TO TOP
EO Non-return Valves EO NON-RETURN VALVES

2-way ball valves for pneumatics and low pressure

2-way ball valves designed for pneumatic systems and other low pressure applications.

Material: nickel plated brass

Threads: BSPP (ISO 228-1 and DIN 259) 1/4" to 2"/p>

Working Pressure: up to 30 bar dependent on series

Working Temperature: -20°C to +120°C

BACK TO TOP