Hose and Tubing
Fittings and Adaptors
Ball Valves
Quick Couplings
Solenoid Valves
Racor Fuel Filtration
Hydraulic Filters
Oildyne Hydraulic Power Units
Marine Steering Hose
ISO 7840 Fuel Hose
Exhaust Hose Sanitation Hose |
 |
Marine hose meets SAE, USCG and ISO standards and is available in all popular sizes.
Used with steel, stainless steel and brass field attachable or crimped fittings.
Variety of tubing types and colours available.
BACK TO TOP |
 |
Wide variety available, including 37 degree flare, bite-type, o-ring face seal, field attachable,
crimped and push-to-connect fittings.
Materials include stainless steel, brass, steel and thermoplastic.
BACK TO TOP |
 |
Low and high pressure, in stainless steel, carbon steel, brass and plastic.
Pressures up to 6000 PSI.
A variety of port configurations available. BACK TO TOP |
 |
Quick couplings are available valved or unvalved in steel, stainless steel or brass. BACK TO TOP |
 |
For hydraulic, fuel, pneumatic, refrigeration and process filtration applications.
Available in two, three and four-way configurations with a variety of coil options.
BACK TO TOP |
 |
Filters and separators for petrol and diesel engines that remove contaminates and harmful
water from fuel.
Various flow rates and system configurations to meet any application.
THE ULTIMATE FUEL/WATER SEPARATION SYSTEM
FITTED WITH THE UNIQUE AQUABLOC ELEMENT
SINGLE * DUAL * TRIPLE
Heavy duty systems for flow rates up to 2044 Ltrs Per Hour
TURBINE AND SPIN ON SERIES
Filtration systems designed to protect todays hi-tech expensive diesel and
petrol/gasoline fuel systems.
BACK TO TOP
|
 |
A complete rage of hydraulic filters engineered to meet global standards.
Wide variety of mounting styles and pressure ranges are available to meet application demands. BACK TO TOP |
 |
Compact and completely self-contained with AC or DC motor, gear pump, reservoir,
internal valving, load-hold check and relief valves.
BACK TO TOP |
| SPECIALIST MARINE HOSE |
 |
- A lightweight flexible hose unaffected by marine environment, specified by the UK's
leading manufacturer of hydraulic marine steering equipment.
- This hose provides flexibility and low volumetric expansion for rapid, accurate hydraulic
response.
- Manufactured from thermoplastic materials and with a polyurethane cover, it is highly
kink-resistant with excellent abrasion resistance.
- Compared with conventional wire reinforced rubber hoses, marine steering hose is
up to 70% lighter.
- Using brass permanently attached couplings there will be no risk of hose failure due
to coupling corrosion.
Part
Number |
I.D.
in. |
Max
O.D.
in. |
Max.
Working
Pressure |
Min.
Burst
Pressure
psi |
Min.
Bend
Radius
in. |
Weight
lbs./
100ft |
Typ.Vol.
Expansion
at W.P.
cc./ft. |
| MSH-5 |
5/16 |
0.48 |
1000 |
4000 |
2 1/4 |
4.9 |
0.90 |
| MSH-6 |
3/8 |
0.59 |
1000 |
4000 |
3 |
7.2 |
1.70 |
Temperature Range:
-40°C to +100°C (except limited to +57°C for synthetic
hydraulic fluids and water based fluids) |
CONTACT US WITH YOUR REQUIREMENTS TO PURCHASE STEERING HOSE BY MAIL-ORDER
DOWNLOAD INFO SHEET FOR THIS PRODUCT BACK TO TOP
|
|
- To meet the latest European Directive for pleasure craft fitted with inboard engines,
flexible fuel lines are required to meet stringent fire testing as part of the ISO Approval.
- Our fuel hose exceeds these requirements as well as conforming to
International standards,
e.g. USCG, SAE, ABYC, NMMA, etc.
- Manufactured using a 'Barrier Nylon Liner' to prevent fuel permeation even of
alcohol blends, it's superior construction and good flexibility make it an ideal choice
for engine installations.
Part
Number |
I.D.
mm. |
O.D.
mm. |
Working
Pressure
psi |
Min.
Bend
Radius
in. |
Weight
kg/m |
Type
A1/A2 |
| 1/4 ISO |
6 |
14 |
50 |
2 |
0.16 |
A1 |
| 5/16 ISO |
8 |
16 |
50 |
2.25 |
0.20 |
A1 |
| 3/8 ISO |
10 |
17 |
50 |
2.50 |
0.23 |
A1 |
| 1/2 ISO |
13 |
21 |
45 |
3.00 |
0.31 |
A1 |
| 5/8 ISO |
16 |
25 |
45 |
3.50 |
0.31 |
A1 |
| 1 1/2 ISO |
38 |
54 |
36 |
9.45 |
1.73 |
A2 |
| 2" ISO |
50 |
66 |
36 |
11.81 |
2.18 |
A2 |
Temperature Range:
A1
: -30°C to
+140°C
A2
: -20°C
to +100°C
|
DOWNLOAD INFO SHEET FOR THIS PRODUCT
BACK TO TOP
|
 |
- Lloyds Approved Hose for inboard water-cooled marine diesel exhaust applications
in craft up to 24 metres long.
- This very flexible, robust and high quality hose has Lloyds, Rina and DNV type Approval.
- It's construction using top quality material gives it superiority in its application within
engine compartments of fishing boats, work boats, pleasure craft etc.
- A very tight bend radius capability aids compact installations and using good quality
clamps dispenses with the need to cuff the hoses, thus avoiding damage to the hose end.
- It is also an ideal fuel hose with DNV Approval and can be used with total confidence in
marine generator applications.
Lloyds Approval Cert. 99/00027(E1)APP
DNV Approval Cert. S-3597APP
Rina Approval Cert. DIP/4855/03/CS/E/1
Part Number
|
I.D. mm |
O.D. mm |
Working
Pressure psi |
Burst
Pressure psi |
Min.
Bend
Radius mm |
Weight
kg/metre |
| 3/4
exhaust |
20 |
30 |
45 |
225 |
60 |
0.71 |
| 1" exhaust |
25 |
35
|
45 |
225 |
75 |
0.85 |
| 1
1/4 exhaust |
32 |
42 |
45 |
225 |
96 |
1.00 |
| 1
3/8 exhaust |
35 |
45 |
45 |
225 |
105 |
1.08 |
| 1
1/2 exhaust |
38 |
48 |
45 |
225 |
114 |
1.16 |
| 1
5/8 exhaust |
40 |
50 |
45 |
225 |
120 |
1.21 |
| 1
3/4 exhaust |
45 |
55 |
45 |
225 |
135 |
1.34 |
| 2"exhaust |
51 |
61 |
45 |
225 |
153 |
1.49 |
| 2
1/4 exhaust |
57 |
67> |
45 |
225 |
171 |
1.65 |
| 2
3/8 exhaust |
60 |
70 |
45 |
225 |
180 |
1.91 |
| 2
1/2 exhaust |
63 |
73 |
45 |
225 |
189 |
2.00 |
| 2
3/4 exhaust |
70 |
80 |
45 |
225 |
210 |
2.22 |
| 3" exhaust |
76 |
86 |
45 |
225 |
228 |
2.39 |
| 3
1/2 exhaust |
90 |
100 |
45 |
225 |
270 |
2.81 |
| 4" exhaust |
102 |
112 |
45 |
225 |
306> |
3.15 |
| 4
1/2 exhaust |
115 |
129 |
45 |
225 |
345 |
4.11 |
| 5" exhaust |
127 |
141 |
45 |
225 |
381 |
5.02 |
| 6" exhaust |
152 |
166 |
45 |
225 |
456 |
6.23 |
Temperature Range:
-30°C
to +100°C
can also be used for oil suction and delivery.>
|
DOWNLOAD INFO SHEET FOR THIS PRODUCT
BACK TO TOP |
|
- Extra heavy duty sanitation hose of smooth white vinyl specially compounded to provide
excellent resistance to odour permeation.
- A hard PVC helix gives good flexibility and bend radius.
- It is also an ideal hose for critical bilge, drain scupper, live well etc.
Part
Number |
I.D.
in. |
Max
O.D.
in. |
Working
Pressure
psi |
Min.
Bend
Radius
mm. |
Weight
kg/
metre |
| 3/4 white |
19 |
25.4 |
90 |
90 |
0.30 |
| 1" white |
25 |
32.6 |
90 |
110 |
0.46 |
| 1 1/2 white |
38 |
45.6 |
90 |
180 |
0.67 |
Temperature
Range:
-10°C to +60°C |
DOWNLOAD INFO SHEET FOR THIS PRODUCT
BACK TO TOP
|
