Hydraulic Hose Assemblies
BranchesMobile
ServiceAbout
UsValue
Added Services Quality News Hydraulic Hose Assemblies |
|
| Our hydraulic hose assemblies are manufactured in accordance with our quality policy and can be made with most end terminations and any quantity, we also provide an on the spot over the counter service for hose assemblies required immediately. Pressure testing facilities using either water or oil are also available. | |
Parkrimp No-Skive - The Self Assembly System |
|
 |
Parkrimp,
a system based on Parkrimp Hose, Fittings and Tooling, allows
you to crimp flexible hoses with complete safety, but without
skiving the cover. Construction: synthetic rubber tube and cover, 1 to 6 layers of high tensile steel. Dimensions: size -4 to -32 Assemblies: SAE J343/DIN 20024/20066 Working Pressure: up to 34,5 MPa at size -32 Temperature Range: -50°C to +149°C Specifications: DIN 20022 1SN/2SN, DIN 20023 4SP/4SH, up to SAE 100 R16 |
Parkrimp Multispiral |
|
 |
The
first complete range of Multispiral from
4SP/4SH, SAE 100R12, R13 and R15 without the need for skiving,
neither the
cover, nor the inner tube. The Parkrimp System guarantees a total
grip connection between the shell and the reinforcement. |
Parkrimp
Compact
|
|
 |
The design of hose for the future. Whenever you ask
for small bend radius together with high pressure ratings and special
requests concerning temperature and chemical resistance you need
a "specialist" out of our compact hose and fitting range. We also have the capability to manufacture hoses to specific customer requirements. Construction: synthetic rubber tube and cover, 1 to 3 layer of high tensile steel. Dimensions: size -4 to -20 Working Pressure: up to 40,0 MPa Temperature Range: -50°C to + 149°C |
Parkrimp Compact |
|
 |
The
ultra high abrasion resistant "ST" cover features many
application fields, increased service life, lower maintenance
and eliminates
the need for costly hose protectors such as guards or sleeves. |
High Pressure No-Skive |
|
 |
The
protective cover of the hose does not need to be removed before
assembling a reusable fitting on the hose. |
Tube Push-Lok hose |
|
 |
Parker Push-Lock hoses can by used for all low-pressure
applications, as for example robots in the automotive industry, packaging
machines, pneumatic tooling etc. Easy assembling without clamps.
For the automotive industry also available in "free of any wetting
disturbance solvents" (labs free). Construction: synthetic rubber tube and cover, 1 layer of textile, variety of colours for the outer cover. Dimensions: size - 4 to -16 Working Pressure: up to 2,5 MPa Temperature range: -49°C to +149°C |
ParClean No-Skive |
|
 |
The
hose is built for pressure-washing performance and is designed
for use with water only for constant water temperature up to 120°C. The black or blue cover is high in abrasion resistance and is also resistant against many chemicals and animal fats. The hose is extremely flexible and therefore easy to handle. Construction: synthetic rubber tube and cover, 1 or 2 layers of high tensile steel. Dimensions: size -4 to -8 Working Pressure: up to 40,0 MPa Temperature range: -40°C to +120°C (water only) |
Parkrimp No-Skive |
|
 |
Twinhose
for forklift trucks |
Polyflex/Parflex |
|
 |
For
pressures up to 70 MPa. Single and mulitple lines with permanently
attached end fittings for self assembly with Polykrimp/Parkrimp
systems. Applications: Low pressure to high pressure hydraulic, pneumatic and surface finishing, PTFE Hoses. Construction: Thermoplastic hoses with synthetic fibre/steel wire reinforcement. Size range: from 1/4" to 1 1/4" Working pressure: 70 MPa on 1/4" and 27.5 MPa on 1 1/4" Temperature range: -57°C to + 150°C |
Polyflex Ultra High Pressure Thermoplastic hoses |
|
 |
For
working pressures from 70 MPa to 400 MPa. Applications: Hydraulic tools, bolt tensioning, pressure testing, forming technology. End fittings made from high performance steels for maximum safety. Assembly and testing with Polyflex assembly equipment. Construction: Thermoplastic with up to 8 spiral layers of high tensile steel wire. Size range: 4 to 25mm bore. Working pressure: 400 MPa on 5mm to 72 MPa on 50mm Temperature range: -40°C to +100°C |
Polyflex |
|
 |
For
low volumetric expansion and excellent flex-impulse life at pressures
up to 400 MPa. Applications: High pressure cleaning equipment, boiler tube cleaning, hydrodemolition, sewer jetting, water jet cutting. End fittings made from high performance safetly critical materials. Assembling and testing with Polyflex assembly equipment. Construction: Thermoplastic with up to 2 layers of textile reinforcement and up to 8 layers of high tensile steel wires. Size range: from 3 to 25mm bore. Working pressures: up to 400 MPa on 5mm and 90 MPa on 25mm Temperature range: -10°C + 70°C |
Contact Us
2
Witney Road
Nuffield Industrial Estate
POOLE
BH17 0GH
Tel: 01202 673333
Fax: 01202 687788
poole@hyphose.com
Unit
1Trinity Industrial Estate
Millbrook Road
SOUTHAMPTON
SO15 0LA
Tel:
023 80 512555
Fax: 023 80 512999
southampton@hyphose.com
Unit
3
The Warrior Centre
Fitzherbert Road
Farlington
PORTSMOUTH
PO6 1TX
Tel:
023 92 324644
Fax: 023 92 325549
portsmouth@hyphose.com
Trade
Counter Opening Hours
Mon - Fri 7.30am - 5.30pm
Sat 8am - 12pm
Hose
Doctor
24 hours a day 7 days aweek
Freephone 0800 373587
For your specific requirements please contact our Sales department or a Branch near you.
Back
to top
We are an ISO 9001:2000 registered company
Hyphose
Limited, Registered Office: 2 Witney Road, Nuffield Industrial
Estate, Poole, Dorset, BH17 0GH
Registered in England, number 1472439 - VAT number 323 5820 75
© Hyphose Ltd